2025 Ditch Witch® Fluid Management FM13X

Information

2025 Ditch Witch® Fluid Management FM13X

MAKE SHORT WORK OF MIXING

With new design features, improved drilling fluid flow, increased durability and faster mixing cycle and yield times, the FM13X will help keep costs down and productivity up.

Features may include:

POWER
  • Powered by a 12-hp Briggs & Stratton engine. The unit supports all sizes of HDD drill units. A high-performance Flomax
PRODUCTIVITY
  • Wet hopper design increases the venturi inlet from 1.25- to 2-inches - a 60 percent larger opening for material flow and superior fluid mixing. An updated, internal venturi design optimizes fluid velocity, increasing overall system productivity. A one-piece mixing jet handles 8 bags, yielding up to 950 gallons (3785 L) of fluid in fewer than 8 minutes.
SUPERIOR SUPPORT
  • Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

Photos

Highlights

  • Pearl, Mississippi
  • 2025
  • Ditch Witch®
  • Fluid Management FM13X
  • GX390
  • Gasoline
  • Available
  • 20 in (510 mm)
  • 69 in (1.75 m)

Specifications

  • 2025
  • Ditch Witch®
  • Fluid Management
  • FM13X
  • General
  • GX390
  • Honda®
  • Medium: Air
  • 1
  • 23.7 in3 (0.39 L)
  • Manufacturer's net power rating: 11.7 hp (8.7 kW)
  • 3.46 in (88 mm)
  • 2.52 in (64 mm)
  • 3,600 rpm
  • EPA Phase 3 / EU Stage lV
  • Gasoline
  • Solids addition rate, w/metering plate: 30 lb/min (14 kg/m) | Solids addition rate, w/out metering plate: 75 lb/min (34 kg/m) | Typical tank mixing time: 7-10 min | Vacuum, max: 15 in Hg (381 mm Hg)
  • Sound pressure: 92 dbA | Sound power: 105 dbA
  • 512 cfm (14.5 m³/min)
  • Flow rate to drilling unit, max: 220 gpm (832 l/min) | rate: 3.6 gpm (14 l/min)
  • Fluid: 50 psi (3.4 bar) | 2,500 psi (172 bar)
  • Pump discharge rate, water, max: 270 gpm (1020 l/min)
  • Suction port diameter: 3 in (76 mm) | Discharge port diameter: 3 in (76 mm)
  • 100 in (2.54 m)
  • 20 in (510 mm)
  • 69 in (1.75 m)
  • Drilling fluid tank capacity: 400 gal (1514 L)
  • 0.95 gal (3.6 L)
  • Engine: 0.63 qt (0.6 L)
  • Mixing: 1 ft3 (28 L)
  • empty: 450 lb (204 kg) | full of water: 4,253 lb (1929 kg)